Kriega G-Force Jarvis Hydro 4


Kriega G-Force Jarvis Hydro 4

click image to enlarge
visit store

Kriega G-Force Jarvis Hydro 4


Special Edition hydration pack including Hands-free drink tube used by World Extreme Enduro Champion, Graham Jarvis.The G-Force Jarvis Hydro has been designed specifically as an active riding pack with our unique Quadloc harness system. Providing a level of fit and comfort unequalled by any other hydration system. With a fully adjustable back-length and unrestricted under arm movement. Once set, the pack is exceptionally convenient to use, with none of the harness strap re-adjustment necessary on conventional harness systems.The adjustable back also allows the pack position to be moved up to allow large waist packs to be also worn. G-Force Jarvis Hydro can be worn with or without a waist strap - we recommend to use a waist strap for maximum stability, when carrying the full 3 litre (100 oz) water capacityPack Layout3-litre reservoir1-litre side access zip pocketHands-free drink tubeRemovable waist strapTech Specs400(H) x 170(W) x 70mm(D)Military grade 3-litre Hydrapak®Unique QUADLOC harness: adjustable back length with total arm freedomSide access pocketOptional add-on 5 or 10 litre drypack storageOptional harness pocketRemovable waist strapSUPERSPACE: 5mm airspace backYKK® water-resistant zipsHYPALON: abrasion resistant re-enforcementSchoeller DYNATECH with intergrated 3M Scotchlite®420D nylon ripstop: lightweight yet extremely strong3M Scotchlite®: reflective logoG-Force Jarvis brandingLED rear light mounting loop10 YEAR GUARANTEEPack FittingThe pack is supplied pre-set to level 2. For XL fit move to level 3 and level 1 for XS fit.Step 1: Firstly, push the harness strap back into the pack, to release the harness-web tension Step 2: Shorten or lengthen harness by moving slider on web (equal both sides) Step 3: Pull harness strap back out of pack, to tension harness web Step 4: Put on pack and adjust fit as on a conventional harness. Do not over tighten - tidy loose ends - ends under elastic loops. Once set, the harness do not need to be re-adjusted each time as the pack ergonomics allow the harness to open wide for arm access Hands-Free Tube FittingStep 1: Make a hole in the helmet front air vent. Push the white tube through from the inside Step 2: Slide the Velcro® loops onto the white tube. Push the end onto the dry-break connector Step 3: Remove the helmet inner cheek pad. Stick the Velcro® tabs to a flat area on the inside Step 4: Replace the inner cheek pad and adjust the bite valve position to your liking Note: depending on the helmet size, the white tube may need cutting down. The ideal position for the connector is as near to the helmet as possible.US-5Increase your carrying capacity by 5-litres by adding a US-5 Dry Pack (100% waterproof main body). Reversible zip-pocket or mesh pocket. 10-year guarantee. (See US-5 link below)US-10Increase your carrying capacity by 10-litres by adding a US-10 Dry Pack (100% waterproof main body). Water-resistant zip pocket and mesh pocket on underside. 10-year guarantee. (See US-10 link below)Harness Pocket0.5 litre add-on harness pocket. Padded construction with water-resistant YKK® zip. 3M Scotchlite® relective logo. 10-year guarantee. (See Harness pocket link below)- Kriega G-Force Jarvis Hydro This Kriega G-Force Jarvis Hydro 4 is a product from Sports Bags category.

Kriega G-Force Jarvis Hydro 4





Other items like Kriega G-Force Jarvis Hydro 4 from same manufacturer:

Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German


Pools Big German
Big German





Copyright © 2014 enduro-challenge.com is listed at google, bingT and yahoo!®

Home